Passed mot but dangerous advisory

Here

Now ti clean it up and remove ujs.

Cheers

Marmaduke said:

And some circlip pliers

Click to expand...

“Internal” circlip pliers

Cool just what i needed to know lol. One more question for now. Do i have the little gearstick on high lock? Ie just pushed over from right closest to me.. to the left?

Danjo said:

Cool just what i needed to know lol. One more question for now. Do i have the little gearstick on high lock? Ie just pushed over from right closest to me.. to the left?

Click to expand...

diff lock is over to the left

Danjo said:

Cool just what i needed to know lol. One more question for now. Do i have the little gearstick on high lock? Ie just pushed over from right closest to me.. to the left?

Click to expand...

Different lock is when the little gear stick is on the passenger side, up is low box down is normal, either is fine.

Nice handbag by the way

freelance said:

“Internal” circlip pliers

Click to expand...

The Mad Hat Man said:

not circling pliers then?

(see post#45)

Click to expand...

In swadliscroat thems call circlip pliers

Marmaduke said:

In swadliscroat thems call circlip pliers

Click to expand...

they do in most places

Just take one circlip out of each yoke and use the one that's left in as a stop when fitting the new coupling.

Danjo said:

All great advice guys. Cheers. Shame i cant find anywhere that sells them off the shelf near me. So might take it off and use in diff lock until they arrive .

Thanks

Click to expand...

There is a parts place in burgess hill that can get stuff that day or the next day, can’t remember why they are called but they are an old Sokol motor factors. I use them a lot

Just an update.. i cancelled the uj order. And going for new prop.
One reason is that i cant pull or push the splines in and out.
Also where its been vibrating there is chunk out of the yoke where its been grinding against the bolts and a couple of the bolts have been ground by the yoke lol.

Just an update.. i cancelled the uj order. And going for new prop.
One reason is that i cant pull or push the splines in and out.
Also where its been vibrating there is chunk out of the yoke where its been grinding against the bolts and a couple of the bolts have been ground by the yoke lol.

Plus the beast is a whole lot smoother running with the rear prop off

i @Danjo Don't worry about the splines not moveing thats the way they are ! VERY STIFF ! if it were easy to move then I would be concerned ! SO DO NOT bin the old prop IT'S still GOOD !