Part # help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
natas

natas

Well-Known Member
Posts
1,434
Location
Bahamas
I have looked everywhere and spoke to a few places with no luck.
Perhaps they dont understand me?


I have a 1999 300tdi truck cab.

The truck cab has a rear window with 2 pieces of sliding glass.

When both of the pieces of glass are shut, in the middle of the window where the 2 pieces overlap on the end of each peice of glass there is a "cap" of sorts. Its black and fits on the end of both pieces.These seal the window and stop the glass from rattling.

One of mine is missing and this causes the window to rattle horribly.

Thanks.
 
Tivster said:
that'd be
AEU 2805 LH
AEU2806 RH
or
MWC 7625 LH
MWC 7648 RH

Click this link & scroll down to page 867 :)

http://www.retroanaconda.com/landro...csi_scan_filename=9_body_chassis_p794-923.pdf
Click to expand...


Nope.

Those part #s are for the catchs.

I need the strips on the other end of each glass, it runs the length of the glass. Its black metal or plastic (not sure) but has nothing to do with locking the glass.
It seals the 2 pieces of glass in the middle when the window is shut.

Thanks.
 
I wedge mine with cardboard BUT I reckon you could go to a staioners and get those plastic sleeves that hold together reports and projects.

Might be easier and cheaper!
 
rearwindowz.jpg



Its the things running down the middle vertically, each glass has one so that they seal when closed or open.
 
You must log in or register to reply here.

Similar threads

styleruk
Rear slide window inserts
Replies
16
Views
2K
styleruk
styleruk
mjr92
Rear sliding side windows
Replies
1
Views
359
julianf
julianf
Rubberknees
P38 rear door window trims replacement
Replies
14
Views
1K
Rubberknees
Rubberknees
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
1K
Hammer'n'tongs
Hammer'n'tongs
Back
Top