P38 DSE fuel leak-off pipe replacement q's

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

jgreenwell

Member
Posts
96
Location
Durham
Hi all, just a couple of quick questions.

What diameter pipe do I need, 3.2mm?? Also is it just a case of pull off the old, push on the new pipes? Do they self bleed??

Kind regards
Jonathan
 
3.2mm if you can find them. I bought a reel from halfrauds including the blanking plugs they were 3mm but i didnt see the problem with a tighter fit,
You just need to cutt them to the appropriate length.
You will find cranking over your car once they have been fitted may take a few attempts before it'l start properly. ;-)
 
aj11r said:
3.2mm if you can find them. I bought a reel from halfrauds including the blanking plugs they were 3mm but i didnt see the problem with a tighter fit,
You just need to cutt them to the appropriate length.
You will find cranking over your car once they have been fitted may take a few attempts before it'l start properly. ;-)
Click to expand...
Not really a major problem at the moment as she wont start anyway :) Plus I need to get around the problem of the imobiliser:rolleyes:
 
you should bleed the fuel line on the fuel pump, just slack the nut off and crank the engine for 20 secs, tighten up and your done.
 
You must log in or register to reply here.

Similar threads

Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
4K
BDC
B
W
L322 Fuel pipes on the fuel pump 4.4 petrol wont come off
Replies
2
Views
665
Willos
W
G
L322 L322 2004 Td6 RR Vogue - Intermittent 'Fuel System Error' message.
Replies
6
Views
2K
johnmaambo
J
P38 Monkey
P38 4.0SE 1997 - A/C condenser info request
2
Replies
23
Views
2K
pwood999
pwood999
P
Fuel sender - pipe union?
Replies
1
Views
486
Peep110
P
Back
Top