P38 Diesel. What engine temperature is normal?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
So far, I've been making a barn door for the barn at the end of the building and now I'm chatting with fellow landy bods. I might go and pull the door card off the bus as it's locking and then not locking with the remote.
Well I've taken down my 10x8 shed because a tree next to it has to come down as the trunk is half rotted through at the base. Would be the one that's leaning towards the nearest house. Bugger of a job on your own,:rolleyes::D Think I'll go and pour myself a Guinness.:D
 
Well I've taken down my 10x8 shed because a tree next to it has to come down as the trunk is half rotted through at the base. Would be the one that's leaning towards the nearest house. Bugger of a job on your own,:rolleyes::D Think I'll go and pour myself a Guinness.:D
Pour me one as well. Well done mate. :D
 
the P38 top hose needs a 34mm adapter and they can be found for peanuts online

upload_2021-4-5_16-28-47.png


I fitted an electric fan that operates from a switch like the one above. The fans that Revotec fit the the P38 are 10 amp, 15.2 inch Comex fans, I bought the 20 amp version and fitted that. It has a taller motor.

This is the 10 amp version that Revotec sell

upload_2021-4-5_16-31-19.png


And this is the 20 amp version that I fitted

upload_2021-4-5_16-40-43.png


Comex F30P12L8205HT08S

It has a few mm clearance from the crankshaft pulley, should be fine

upload_2021-4-5_16-41-58.png
 
Last edited:
Back
Top