P38 2001 tracking set up

vtwin said:

The tyre centres never seem to set the tracking right, I am not sure if its the modern equipment and the half day training but new tyres and tracking set and its always ends up with bad steering and tyres wearing on the inside. The fluid coupling in the transfer box is still good, I have changed the knuckle ball joints, steering damper and various ball joints over time.
I asked one lad who was setting it what was the amount and he said I don't know I put the reg in and set it into the green!
Anything I am missing before I get new tyres fitted?

Click to expand...

Mark Piercy said:

I did my own à few year ago. I set it with 3mm toe out using a tape measure and wood clamped to the wheels. Been good since then.

Click to expand...

brianp38dse said:

Just found a post, parallel to 1/16" toe out.

Click to expand...

brianp38dse said:

Just found a post, parallel to 1/16" toe out.

Click to expand...

vtwin said:

Thanks for the replies, think I will have a go at the tracking myself first to see if its miles out, its due MOT soon and new front tyres so need to get it right first.

Click to expand...

vtwin said:

Thanks for the replies, think I will have a go at the tracking myself first to see if its miles out, its due MOT soon and new front tyres so need to get it right first.

Click to expand...