out of ideas again!
- Thread starter wrxfifer
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wrxfifer
Active Member
- Posts
- 916
does no one know of a way to test these things im not believing i have 2 obd2 ports installed now and there both fecked maybe 1?
i got the other plug as guaranteed working with all wires attached and have just stripped a bit plastic back on each existing wire from original obd2 socket and very carefully soldered the CORRECT corresponding wires on surely one should work i been at it all night again on start comms initialise 28 and 80s stop adjust unplug car off car on start again and again and again etc etc etc etc theres got to be something can be done here ?????????????????????????
i got the other plug as guaranteed working with all wires attached and have just stripped a bit plastic back on each existing wire from original obd2 socket and very carefully soldered the CORRECT corresponding wires on surely one should work i been at it all night again on start comms initialise 28 and 80s stop adjust unplug car off car on start again and again and again etc etc etc etc theres got to be something can be done here ?????????????????????????
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
time for irishrover to get involved,send him a pm grant.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
if you stop now all the time money and effort will be wasted.you have got to see it through now.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
ok,a feckin big whisky then.
- Posts
- 83,296
- Location
- Embasinga stocæ
Is that wise?
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
sure does,i like a nice irish whiskey myself,but a nice single malt won't be thrown away either.
