ooops.......

Hiya folks. After some advice.... i put some new parabolic springs and poly bushes on my series 3 a couple of weeks ago and as soon as i started to drive it i found a vibration at about 40mph, then again at around 60. It sounds like a cortina i once had with an unbalanced shaft that i fitted with a gearbox conversion but obviously i havent touched any thing else on my landy... any ideas?? any similar experiences?? it has raised my body by quite a few inches, and also ive got in two wheel drive with the free wheeling hubs set to 2 wheel so i'm assuming that its from the g'box towards the rear. any advice will be appreciated, cheers, terry.

yep,you,ve radically changed ya angle of yer propshafts,and they dunt like it.
if yer rear shackle plates are vertical yam askin for trouble.
bin there dun it took em off and fitted standards,an they went **** on me aswell

oil dripper said:

yep,you,ve radically changed ya angle of yer propshafts,and they dunt like it.
if yer rear shackle plates are vertical yam askin for trouble.
bin there dun it took em off and fitted standards,an they went **** on me aswell

Click to expand...

cheers yam. do i put up with it or will something end up breaking? cheers terry, an arm from the black ****ry anuul

ere they wunt ****part pair o bollixs was they

i ended up with one side taken a likin to me chassis,because there were no rearward movement in the shackles it went thru me chassis instead.it were,nt rotten either just pushed its way thru
they int britpart springs you,ve fitted are they?

Sirus said:

ere they wunt ****part pair o bollixs was they

Click to expand...

ar,still in me shed awaitin collection hehee