OMG ......... what have i done ...........

Not looking too good is it chaps











Yes this is what happens when you have no money and buy a Disco

Too far in to it now to give up

ermmm
ah fink that if that were mine, I'd be breaking fer spares!

good on yer fer takin on such a big job!

one can only assume that landrover ran out of disco metal fer yer side and used a bit of gaylander door metal and then yer wint and got it wet.
contact C.A.B. and see if they reckon you can get some compensation from landrover

Christ on a bike Chaos! hope you don't think my 4 spare nuts are going to hold it all together, try a bit of gaffa no one will notice promise!

they must have been some serious greenlanes you went down the other day!!!

I suddenly feel my disco is in wunnerful condition....thank you, I feel soooo much better

Fookinell, bad case of tin worm there. Best of British wi that matey

The trick is to only look at a bit of it at a time. Doesn't seem so bad then!

Had a classic RR in a similar state, started welding the back wheel arches and finally ran out of rust at the headlights! Looking at it I'd guess the sills n floor pans'll have had it too. Oh, maybe I shouldn't have said that....

Captain, im planning on getting a disco and ripping the injun and axels off it. When I do would you want the carcus for body panels??

that happened to my first disco scrap it and get a decent one you know where to check for the rot











leekegs

Take5 said:

Fookinell, bad case of tin worm there. Best of British wi that matey

Click to expand...

I think thats the prob T5 - it IS the best of British - thats the problem.

Well thats it folks ............ project now breaking for spares

Due to the purchase of a newer Discovery (it's the red one) 300TDI

CaptainChaos said:

Well thats it folks ............ project now breaking for spares

Due to the purchase of a newer Discovery (it's the red one) 300TDI

Click to expand...

That looks a bit more like it, very smart;

Good luck

Cheers
Dave

CaptainChaos said:

Well thats it folks ............ project now breaking for spares

Due to the purchase of a newer Discovery (it's the red one) 300TDI

Click to expand...

Now we're talking, that looks a lot more healthy, cheeky question, how much did you pay for it and how many miles?

You should never give up to easy when there is so much free metal about to repair it. Do it the T*p Gear way (council estate Garage roof tin) just needs the ridges bangin out.

girvtheswerve said:

Now we're talking, that looks a lot more healthy, cheeky question, how much did you pay for it and how many miles?

Click to expand...

121.000 miles ....... MOT Feb ........ £1000

Rev counter not working and a couple of indicator faults but other than that pretty damn good hey?

CaptainChaos said:

121.000 miles ....... MOT Feb ........ £1000

Rev counter not working and a couple of indicator faults but other than that pretty damn good hey?

Click to expand...

That looks absolutely brilliant, well done, really well done.

You lucky b*gger

Cheers and good luck

Dave

hang on, seen them pics before........

metallicachick86 said:

hang on, seen them pics before........

Click to expand...

YUP you have

They were used in my greenlaning write up in the greenlaning section on here

The green one in the pics is my now to be dismantled 200TDI (my first Landy) and i have bought the red one from the friend who came with us

Very lucky to get her too

I've got a **** load of rust vito in my shed, but its to late for that...
But its hear for the next time if you need it?