Oil pressure switch wiring

Hi all,

1999 Discovery 2 Td5,
I have realized that my oil pressure switch is not connected to anything, i cannot find a plug dangling anywhere, does any one have a photo of where it should be routed so that i can go chasing it.


Help please.
Thanks
Matt

Try this, info is taking from D2 electrical library manual which can be downloaded from the www.

discool said:

Try this, info is taking from D2 electrical library manual which can be downloaded from the www.

Click to expand...

I've seen this thanks, looking more for where it originates from our of the main loom as I can't find any wires

That white/brown wire runs from the grey plug near the ECU into the harness then at the back between the engine and firewall to the switch and that's the only one that matters cos the switch is earthed via fixing

sierrafery said:

That white/brown wire runs from the grey plug near the ECU into the harness then at the back between the engine and firewall to the switch and that's the only one that matters cos the switch is earthed via fixing

Click to expand...

Cheers @sierrafery