offsets to replace spacers

steve2905 · Mar 27, 2015

Hi.
i have modular wheels and 30mm spacers.
i need new tyres soon and want to replace the wheels with a suitable offset / back space to allow the tyre outer wall to remain in the same position.
any ideas?
thanks!

chris mcc · Mar 27, 2015

Surely you need 30mm extra offset than you have now!

lucifus · Mar 27, 2015

Lol. Find out what size and offset your rims are now. It should be stamped on the inside of the rim.

blue beasty · Mar 27, 2015

Just remember you need to take 30mm OFF the offset.

Negative offset moves the rim out

lucifus · Mar 27, 2015

It's more than likely you have 0 offset modulars. If they are 16x7 et0 then you want to find some that are et-30. There's plenty of good sites that calculate this for you. Just post what you have and someone can point you in the right direction.

steve2905 · Mar 27, 2015

Superb. Thanks guys!

steve2905 · Mar 27, 2015

Where abouts on the rim? Is it a wheel off job? Just crawled underneath and cant see anything on any of the wheels?

lucifus · Mar 27, 2015

You'll have to take it off and clean it up no doubt. It may be where it bolts to the hub

offsets to replace spacers

steve2905

Member

Attachments

chris mcc

Still fixing it!

lucifus

Active Member

blue beasty

Leaks an prone to bits dropping off

lucifus

Active Member

steve2905

Member

steve2905

Member

lucifus

Active Member

Similar threads