HannahLandRover
New Member
- Posts
- 7
Does anybody know where you can get a total nut and bolt rebuild kit?
Nut and Bolt Rebuild Kit.
- Thread starter HannahLandRover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
they dont come in kit form ,depends on what and how far rebuild will be
HannahLandRover
New Member
- Posts
- 7
Rebuild is a complete rebuild.
petit_pablo
New Member
- Posts
- 179
- Location
- Mkt Rasen, Lincs
Whats remaining of vehicle to be rebuilt? Chassis, bodypanels, axles, engine?
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
Are you stripping it all down to put it back together with new nuts and bolts then or is it already like a box of Lego?
Try a google as there is a company that does full nut and bolt kits for series land rovers but the cost is well into the hundreds
Land Rover Parts | SERIES II,IIA, III, RANGE ROVER, 90, 110, Full Body Fastener Kits
Lynall
Land Rover Parts | SERIES II,IIA, III, RANGE ROVER, 90, 110, Full Body Fastener Kits
Lynall
Ghost
New Member
- Posts
- 297
Just get the lot from Screwfix or similar would be my suggestion. What I've done with mine, just buy a few hundred of the more common M6, M8 and M10 sizes with associated washers and nuts and then any other specialist bolts can be purchased as and when you find you need them.
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
slomofo
Well-Known Member
- Posts
- 1,383
- Location
- Bardsville
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
why not just ring landrover and tell them you want a replacement for every nut and bolt ,washer, and screw im sure they will sell you the lot
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
khaos
New Member
- Posts
- 2,907
- Location
- Sheffield, South Yorkshire.
It will cost a fortune, you are better off using your own bolts purchased as needed. Every bolt I replace is over specced compared to the originals. Mine are also all rust proof. Why would you want original when you can have better?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
how do you over spec a bolt
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
and short of making them out of titanium, how do you rust proof one (which is over specced as opposed to stainless)?
