not starting

Hi guys got a 1991 3.9 v8 range rover just done the head gaskets on it put it all back together and now it won't start. I've checked all the wires they are all fine. I basically have no spark I checked for fuel and on the initial turn of the key I get fuel but when the engine I cranking over there is no fuel comeing out (is this normal) my only thinking is I my have damaged the coil as I've knelt and moved around it any advice would be much appreciated thanks mike

would sound like coil wiring , signal for ecu comes from the coil and obviously the 2 wires for the amplifier plus ignition feed

Great so the fuel is normal to do that then think I will fit a new coil and try that