Noises...

Green Bob · Mar 20, 2009

Clunk when accelerator applied quickly from foot off completely.

Horrible vibrating noise when in 4th around 25 and 5th around 30.

Any diagnosis?

Obviously, not a lot of information, but we'll start at minimum and work up...

The Mad Hat Man · Mar 20, 2009

UJ's
A frame joint
Diffs
gearbox/Tbox intermediate gear.

Green Bob · Mar 20, 2009

All of them?

What for what?

storm99 · Mar 20, 2009

a frame ball joint is the usual suspect

Trewey · Mar 20, 2009

A frame ball joint for the clunk, Prop UJ's for the vibration.

Green Bob · Mar 20, 2009

How easy to replace the a frame ball joint?

Griffdowg · Mar 20, 2009

dont know but i think mine needs doing too. sounds like a slack transmission. UJ's T box bearings worth checking.

G

storm99 · Mar 20, 2009

can be a bugger to get the new one in, could just slide in...dont know til you try, theres a thread here somewhere....not that difficult, especially if you can get it on a lift

Trewey · Mar 20, 2009

Green Bob said:
How easy to replace the a frame ball joint?

s'OK if you've got a big vice and a big hammer.

Dirty Gertie · Mar 20, 2009

Treworgey 90 said:
s'OK if you've got a big vice and a big hammer.

......and if you haven't it can be a complete bastid!!!

karlos · Mar 21, 2009

its a bastid did mine the other day luckily i have a very good mechanic who works for me part time so he did most of the grunt work however it still vibrates like a beeeatch on a twin tub especially round the 60 to 70 mark in fifth he also said gearbox mount was fooked but the divvy car parts place sent an engine mount instead

Noises...

Green Bob

Active Member

The Mad Hat Man

Well-Known Member

Green Bob

Active Member

storm99

Spreading Joy & Harmony

Trewey

Cockernee, Pasty munchin bastid.

Green Bob

Active Member

Griffdowg

New Member

storm99

Spreading Joy & Harmony

Trewey

Cockernee, Pasty munchin bastid.

Dirty Gertie

New Member

karlos

New Member

Similar threads