No revs when in gear

P38guy · Jan 17, 2014

97 Diesel Auto
Guys
I'm on my way to a new LZ members rangie No revs when in gear hi or lo box foot to floor and nothing but a crawl revs are normal when in N or P any ideas appreciated

wammers · Jan 17, 2014

Someone had this problem recently can't recall the fix but do a search.

P38guy · Jan 17, 2014

O.K Fuel temp sensor is it in pump ? I know the petrol fuel temp sensor is on fuel rail but on the diesel no idea. If it is in pump is it a D.I.Y fix special tools etc.
I noticed on another thread the sensor can be bypassed to get it working as a temp fix ?
Thanks

Datatek · Jan 17, 2014

Fuel temp sensor is in the FIP.

wammers · Jan 17, 2014

Failure of the fuel temp sensor should not produce the symptoms you describe. If it fails a substitute temp of 60 c is used.

P38guy · Jan 17, 2014

Thanks Wammers, fuel temp sensor fault was showing on diag and yes nothing to do with the no revs problem, interesting that no other faults are logged. just swapped gearbox ecu and no difference. Could it be seized vcu ? will do the test and find out

wammers · Jan 17, 2014

P38guy said:
Thanks Wammers, fuel temp sensor fault was showing on diag and yes nothing to do with the no revs problem, interesting that no other faults are logged. just swapped gearbox ecu and no difference. Could it be seized vcu ? will do the test and find out

No that would only effect car when moving. There has been a thread on this recently have a look for it.

sovereign · Jan 17, 2014

Yes here is the thread, think it actually was the fuel temp sensor.

http://www.landyzone.co.uk/lz/f10/accelerator-wont-work-gear-238133-10.html

wammers · Jan 17, 2014

Yes would seem it was fixed by changing fuel temp sensor. Strange one that.

P38guy · Jan 18, 2014

Update: Many thanks for the replies
VCU was seized and found that problem after test
Fuel temp sensor replaced and cured the revs fault

Now on to the VCU and other repairs RF receiver, door locks, heater matrix o rings, airbags the list goes on

No revs when in gear

P38guy

New Member

wammers

No longer with us, RIP

P38guy

New Member

Datatek

Well-Known Member

wammers

No longer with us, RIP

P38guy

New Member

wammers

No longer with us, RIP

sovereign

Active Member

wammers

No longer with us, RIP

P38guy

New Member

Similar threads