no drive when i select gear help please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

mercman15

New Member
Posts
30
i was going down motor way about 60 ish when suddenly the was no drive
aa told me my cluth wach was gone. i know it not the role pins in clutch fork as ive done them before so took box out yesterday and clutch looks fine

i selected gear in box when out and the shaft not turnin (oh its 5 speed manaul )

thanks for any help
 
i selected gear in box when out and the shaft not turnin (oh its 5 speed manaul )

You are best off putting it into diff lock as well. Then when a gear is selected both front and rear output flanges on the transfer box should turn.

If not then next thing would be the check the splines on the output shaft of the main box into the transfer box. Easy enough to do. Remove the 6 bolted round cover on the rear of the transfer box just but the hand brake drum. Look in and you will see a shaft inside a gear. If the shaft spins but the gear doesn't move then you have found you problem.

HTH
 
Back
Top