no drive when i select gear help please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

mercman15

New Member
Posts
30
i was going down motor way about 60 ish when suddenly the was no drive
aa told me my cluth wach was gone. i know it not the role pins in clutch fork as ive done them before so took box out yesterday and clutch looks fine

i selected gear in box when out and the shaft not turnin (oh its 5 speed manaul )

thanks for any help
 
mercman15 said:
i selected gear in box when out and the shaft not turnin (oh its 5 speed manaul )
Click to expand...

You are best off putting it into diff lock as well. Then when a gear is selected both front and rear output flanges on the transfer box should turn.

If not then next thing would be the check the splines on the output shaft of the main box into the transfer box. Easy enough to do. Remove the 6 bolted round cover on the rear of the transfer box just but the hand brake drum. Look in and you will see a shaft inside a gear. If the shaft spins but the gear doesn't move then you have found you problem.

HTH
 
You must log in or register to reply here.

Similar threads

P
L322 TD6 lost all drive
Replies
5
Views
281
backinblack
backinblack
C
L322 td6 auto 2005 No Drive when hot
Replies
12
Views
1K
chu017
C
MaxTheDog1
Freelander 1 No gear selection.
Replies
12
Views
558
MaxTheDog1
MaxTheDog1
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
2K
miktdish
miktdish
M
Land rover series 3 clutch/gearbox issue, I just can't get it in gear
Replies
7
Views
1K
tottot
tottot
Back
Top