Andymcghie
New Member
- Posts
- 1
- Location
- Edinburgh
Hello
I was wandering if anyone can help with my problem.
A couple of day ago I suffered the classic problem of pivot ball going through my clutch fork. So i went about changing this for a heavy duty one at the same time. I also changed the clutch plate and cover, as well as master and slave cylinder. I put everything back together and bleed the clutch but when i started the landy up It wouldn't go into certain gears and crunches. (Only managed to get it into first but no drive). I'm able to select all the gear with no issue when engine is off. I believe the clutch is working fine as the pedal has resistance and the hose moves slightly suggesting pressure. Does anyone have any suggestions to what to look into or fix?
I've got a 1983 110 with a 200tdi engine and lt77 gear box.
Thanks and your help would be much appreciated.
Andy ( Edinburgh)
I was wandering if anyone can help with my problem.
A couple of day ago I suffered the classic problem of pivot ball going through my clutch fork. So i went about changing this for a heavy duty one at the same time. I also changed the clutch plate and cover, as well as master and slave cylinder. I put everything back together and bleed the clutch but when i started the landy up It wouldn't go into certain gears and crunches. (Only managed to get it into first but no drive). I'm able to select all the gear with no issue when engine is off. I believe the clutch is working fine as the pedal has resistance and the hose moves slightly suggesting pressure. Does anyone have any suggestions to what to look into or fix?
I've got a 1983 110 with a 200tdi engine and lt77 gear box.
Thanks and your help would be much appreciated.
Andy ( Edinburgh)
