Hi could any one help me with a problem I have with my 1998 landrover discovery 1
I fitted another transfer box last week and thought I'd change clutch at same time , after fitting new clutch / relise bearing & put a heavy dutey clutch fork in when I start my landrover and try to select any gears I can not get it in to gear at all if I turn it off and try to start it in gear with the clutch pedal down the clutch is still engaged
I have read through all the forums replaced new slave and master cylinder
Manually , reverse , and pressure bleed the system I have a good clutch peddle .
On another forum some one sead it could be new pressure plate faulty so I took it back out today and used my old pressure plate still no difference
Hopefully some one on here has a solution cheers
I fitted another transfer box last week and thought I'd change clutch at same time , after fitting new clutch / relise bearing & put a heavy dutey clutch fork in when I start my landrover and try to select any gears I can not get it in to gear at all if I turn it off and try to start it in gear with the clutch pedal down the clutch is still engaged
I have read through all the forums replaced new slave and master cylinder
Manually , reverse , and pressure bleed the system I have a good clutch peddle .
On another forum some one sead it could be new pressure plate faulty so I took it back out today and used my old pressure plate still no difference
Hopefully some one on here has a solution cheers
