Newbie

Boxoftricks · Jan 6, 2019

Hi guys, I’ve been offered a half finished Defender 90 build with 80% new parts including a new 2017 chassis, suspension, running gear and rebuilt engine. I’ve rebuilt a few cars in my time including V8 cobra replicas.

My question is how easy is it to get a 90 through an IVA with a 2” lift kit and petrol V8? I’ve never done anything with 4x4’a so appreciate your thoughts. I don’t want to end up with a Q plate but believe as 80 + % new should be OK.

Knappster · Jan 6, 2019

Hi and welcome!

I’ve no experience of putting a vehicle through the IVA so can’t help with that. The dvla website should have some general advice on the points system to let you know if the vehicle will need a Q plate.

Don’t forget some pics when you get it, and most importantly, decent security. Defenders get nicked at a scary rate...

Hippo · Jan 6, 2019

Welcome to the forum

Ask over ere int tratter section over ere:

https://www.landyzone.co.uk/forum/defender-90-110-130.7/

I think yer need to be careful of the new chassis which I assume is said to have replaced the old one. The tratterer's on ere will advise int more detail... but proof of what it was in it's previous life will help you int future and also stop yer buying something stolen.

Edit: It's a new vehicle, built new from scratch with no old chassis.

Boxoftricks · Jan 6, 2019

Hippo said:
Welcome to the forum

Ask over ere int tratter section over ere:

https://www.landyzone.co.uk/forum/defender-90-110-130.7/

I think yer need to be careful of the new chassis which I assume is said to have replaced the old one. The tratterer's on ere will advise int more detail... but proof of what it was in it's previous life will help you int future and also stop yer buying something stolen.

Thanks Hippo. It’s a complete new build. New chassis. It’s being built up in standard 90 spec with a lift kit and V8

DanClarke · Jan 6, 2019

Take the chassis plate of the old chassis and weld it on the new one?

Boxoftricks · Jan 6, 2019

DanClarke said:
Take the chassis plate of the old chassis and weld it on the new one?

Hi Dan, there is no old one. It’s not a rebuild. It’s a new build from the ground up. I don’t want to buy it to find out it’s a total pig to get through the test.

DanClarke · Jan 6, 2019

If its totally new and never existed before then I'm not sure where that leaves you.
Best Wishes & Good Luck.

Ian M in France · Jan 6, 2019

Hi I would think if all new parts it could be inspected and registered as new but with 80% new parts would be like a kit car and would have a Q plate as can not give you a age related plate as it has no age? do they still do Q plates? I would think it will be a pain and would ask the seller to register it before buying it then you do not get stuck with something that can not be registered

Newbie

Boxoftricks

New Member

Knappster

Well-Known Member

Hippo

Lord Hippo

Boxoftricks

New Member

DanClarke

Well-Known Member

Boxoftricks

New Member

DanClarke

Well-Known Member

Ian M in France

Well-Known Member

Similar threads