Hi folks,
I have replaced the head gaskets on my 97 Discovery V8 EFI LPG and I have built it all back together again except for a few hoses and some wires not sure where they go and from the start these wires were not in good shape either.
I was hoping there may be some one with a bit more experience who wouldn't mind giving me a helping hand. I want to just get her back on the road again. The problem I have is inexperience and not a lot of time to do it and the two combined means when I do get time to do it I spend most of the time researching things on internet or on rave . If someone with more experience could help me out it would go a lot quicker and I would really appreciate it.
I'm in the south shore area of Blackpool . There will be lots of brews and food to keep us going at it.
And I apologize if this is a bit long winded.
Many thanks Ben.
I have replaced the head gaskets on my 97 Discovery V8 EFI LPG and I have built it all back together again except for a few hoses and some wires not sure where they go and from the start these wires were not in good shape either.
I was hoping there may be some one with a bit more experience who wouldn't mind giving me a helping hand. I want to just get her back on the road again. The problem I have is inexperience and not a lot of time to do it and the two combined means when I do get time to do it I spend most of the time researching things on internet or on rave . If someone with more experience could help me out it would go a lot quicker and I would really appreciate it.
I'm in the south shore area of Blackpool . There will be lots of brews and food to keep us going at it.
And I apologize if this is a bit long winded.
Many thanks Ben.