auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
I've had a lot of electrical problems with the 300 Disco in the past week. A brief summary is...
No rev counter
No speedo
No temp gauge
No ignition switched dash lights, etc.
Frantic relay clicking underneath the dash.
Random wipers.
I posted a thread thinking it was the main ignition relay that was at fault (many thanks to Discool for his help on that thread) - http://www.landyzone.co.uk/lz/f8/od...main-ignition-relay-056700-5260-a-195979.html but now I have identified the problem - I just don't know what the cause is!!!
Underneath the dash there is a green wire which is 12v ignition switched - I know this for a fact as I tapped into this wire two years ago to feed some accessory relays and labelled the wire. After hours and hours of head scratching in the past few days I have checked it and when the ignition is switched on it only gives out 4.8 volts - when the battery is 12v+. I have run a fused wire with a switch into this green wire and everything works fine!!
The question is...
Where does this green wire go to/come from?
What would cause the wire to drop over 7 volts?
Any help would be greatly appreciated.
No rev counter
No speedo
No temp gauge
No ignition switched dash lights, etc.
Frantic relay clicking underneath the dash.
Random wipers.
I posted a thread thinking it was the main ignition relay that was at fault (many thanks to Discool for his help on that thread) - http://www.landyzone.co.uk/lz/f8/od...main-ignition-relay-056700-5260-a-195979.html but now I have identified the problem - I just don't know what the cause is!!!
Underneath the dash there is a green wire which is 12v ignition switched - I know this for a fact as I tapped into this wire two years ago to feed some accessory relays and labelled the wire. After hours and hours of head scratching in the past few days I have checked it and when the ignition is switched on it only gives out 4.8 volts - when the battery is 12v+. I have run a fused wire with a switch into this green wire and everything works fine!!
The question is...
Where does this green wire go to/come from?
What would cause the wire to drop over 7 volts?

Any help would be greatly appreciated.