my first landy

hi all haven't posted much but have in the introduction section a while ago but i though i would share my first landy with you guys its not gonna be restored as per say but tided up and painted maybe a few extras its a 1985 (c reg ) defender 110 pick up with ifor Williams back chassis pretty tidy from what i see and the interior isn't too bad for the year it nedds a new rear x member and a bumper and that's about really its got the 2.5 na engine in it hopefully soon to be a 200 tdi its been stood and not started for 5 years or more put a charged battery on it and second turn it fired and runs sweet another thing it does needs is a back section of exhaust but all the more reason for a side exit it hasn't got a clutch pedal at the mo but traced it down to the slave cylinder as there's no fluid getting out of the bleed nipple and i have been given a master cylinder so will change that as well ive got a couple of pics at the mo but will get more cheers guys

rgds scott

Good luck.all the best

:violent::violent::violent::violent::violent:

Luckytone said:

Good luck.all the best

Click to expand...

thanks mate first thing i learnt was where the bonnet pull was lol just ordered slave so ill fit master tomoz and slave when it comes

looks a good project what else you got planned for her?

well its gonna be my first car at the mo so not allot at the min apart from getting half decent at the minute then hoping to lift her and a full rebuild and galv chassis shes also going to be my shooting vehicle so a lightforce lamp threw the roof and some spot plus a cb

Scottb123 said:

well its gonna be my first car at the mo so not allot at the min apart from getting half decent at the minute then hoping to lift her and a full rebuild and galv chassis shes also going to be my shooting vehicle so a lightforce lamp threw the roof and some spot plus a cb

Click to expand...

nice so what you 16,17? will look good after a wash

17 mate got my theory again tues 2 nd time lucky I hope I've got a steam cleaner I can use which will bring it up well so will get a couple of pics then plus the person I've had it off bought me some newish shocks and springs was only on the motor for a couple of months and a set of genuine landy light guards which are a 150 on there own which was a thank because I've been helping on his farm

Atb scott

17 mate got my theory again tues 2 nd time lucky I hope I've got a steam cleaner I can use which will bring it up well so will get a couple of pics then plus the person I've had it off bought me some newish shocks and springs was only on the motor for a couple of months and a set of genuine landy light guards which are a 150 on there own which was a thank because I've been helping on his farm

Atb scott

Looks a nice 110

Thanks

Looks good, let us know how you get on with it.

well took the clutch pedal box out today as it would be easier and took master cylinder off and its seized back hence no fluid getting to slave but was given a brand new mc but the rod length was different so i swaped them over and its ready to go back on Wednesday slave should be here as well so i might as well put both new on then i know its good for a bit

rgds scott

Here's some more pics as promised took her for the first spin today as I managed to get a clutch pedal











Also find the first bit of but it's not too bad

Rgds scott

that dont look too crunchy...good luck...

...bin them kin seats tho..

I should check out some insurance quotes before you get too carried away mate, the 90 in my pic is my sons that i bought for him when he was 14, quotes at the minuite for him (17 and full licence) 4k !