P38A MOT passed!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RangeRoller dt

Well-Sprung Member
Posts
14,413
Location
Trapped inside my head @ LZ asylum
MOT failed on two things. I have few days to get the parts as cheap as possible if I want it done.

Anybody got any ideas of cheapest parts numbers?

1) front tie rod bar - whole.
2) rear tail pipe

Britpart is an option at this stage :oops::(
It has to be cheap as I’d have to pay the garage at the end too
 
Last edited:
I’d have to pay the garage at the end too

Why?

Thought it was going for a Pre- MOT inspection?

Take it and do yourself you have a grace period (7 days?) and free retest only on what failed, we’ll sure that used to be the rules:eek::)

But things change:) so what do I know:D..

J
 
MOT failed on two things. I have few days to get the parts as cheap as possible if I want it done.

Anybody got any ideas of cheapest parts numbers?

1) front tie rod bar - whole. ANR3826/TiQ000020?
2) rear tail pipe

Britpart is an option at this stage :oops::(
It has to be cheap as I’d have to pay the garage at the end too

Panhard rod is ANR3666. Bushes are cheaper what's wrong with it?
 
they said front tie rod/track bar - ends are gone so get the whole bar.

but do they mean one in front of axle or behind front axle?

Track rod is the one behind the axle. One end can be replaced other end is part of track rod. Then there is Panhard rod at front of axle anchoring it to chassis. Then there is drag link from steering box arm to N/S swivel hub. Think you had better ask them.
 
I will price the options up and go see them tomorrow morning.

I can see
  • Panhard rod - ANR 3666 , £30 approx
  • Tie rod - TiQ000020 , £30 approx
  • Drag link - QHG000060 , £30 approx
Reasonable I can manage one of them
  • Rear single box - ESR 3538 (as below)
they all come up as 4.0/4.6 single rear pipe, does this fit/matter? :confused:
 
Last edited:
I will price the options up and go see them tomorrow morning.

I can see
  • Panhard rod - ANR 3666 , £30 approx
  • Tie rod - TiQ000020 , £30 approx
  • Drag link -
Reasonable I can manage one of them
  • Rear single box - ESR 3538 , £70-100+,
they all come up as 4.0/4.6 single rear pipe, does this fit/matter? :confused:
I found Foundry 4×4 cheap for the steering bits they are in your neck of the woods but delivery is quick.
 
Most sell cat back systems together for £98. They do have the odd rear box only if you ask
F59D021F-6845-4EAE-8D79-C6DF9F0E3206.jpeg
 
Last edited:
Went to garage for them to show me. By front rod they meant the drag-link (frontmost of vehicle). I’m guessing the damper may also be tired but they said it’s fine, it is easiest try and get whole thing off and replace lot - it’s rusted together and new one comes with new linkages.

Paddocks Spares it was - they had a web offer on the cheapest option drag-link, and although Foundry 4x4 are cheaper on this item, as I’m getting the rear exhaust from paddocks may aswell have it all delivered as one.
Ordered this morning - 2 stated in stock items with express delivery £79inc vat.

Indy will put them straight on with the new mid box and retest. They recognised that there has been a lot of work done since they saw it last year :)
 
Went to garage for them to show me. By front rod they meant the drag-link (frontmost of vehicle). I’m guessing the damper may also be tired but they said it’s fine, it is easiest try and get whole thing off and replace lot - it’s rusted together and new one comes with new linkages.

Paddocks Spares it was - they had a web offer on the cheapest option drag-link, and although Foundry 4x4 are cheaper on this item, as I’m getting the rear exhaust from paddocks may aswell have it all delivered as one.
Ordered this morning - 2 stated in stock items with express delivery £79inc vat.

Indy will put them straight on with the new mid box and retest. They recognised that there has been a lot of work done since they saw it last year :)

All you need to do is get one and fit it correctly.
 
Back
Top