M.O.T Failure Headlamp Adjusting Not Working (no longer fitted)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
marjon said:
If a complete headlamp unit has been replaced with a unit that was manufactured with HID or LED light sources, it must not be failed for ‘Light source and lamp not compatible’ but it must meet all other requirements detailed in section 4 of this manual specific to the type fitted at the time of test.

Vehicles with high intensity discharge (HID) or LED dipped beam headlamps may be fitted with a suspension or headlamp self-levelling system. If these systems have been fitted, they must work.

Taken from the link from @kevstar

J
Click to expand...
Fail !
 
Toyota Twonk said:
Modified lights on vehicle from original fitment.

Fail.
Click to expand...
Read it properly.

Its from the govt site and says
marjon said:
If a complete headlamp unit has been replaced with a unit that was manufactured with HID or LED light sources, it must not be failed for ‘Light source and lamp not compatible’ but it must meet all other requirements detailed in section 4 of this manual specific to the type fitted at the time of test.

Vehicles with high intensity discharge (HID) or LED dipped beam headlamps may be fitted with a suspension or headlamp self-levelling system. If these systems have been fitted, they must work.

Taken from the link from @kevstar

J
Click to expand...

J
 
sierrafery said:
Strangely, according to the OP this vehicle didnt fail due to the modified lights but cos the levelling doesnt work o_O
Click to expand...
That's because they are modified.
Original lights would have level adjusters so the tester is right to fail the vehicle because it has a modified lighting system that doesn't work as it should when originally built.

Fail is correct
 
Toyota Twonk said:
That's because they are modified.
Original lights would have level adjusters so the tester is right to fail the vehicle because it has a modified lighting system that doesn't work as it should when originally built.

Fail is correct
Click to expand...
I didnt say it isnt correct just that its strange that it failed just for the sdjustment while as you say it should have failed cos the lights are not original regardless of adjustment. Based on this failure the OP(or others too) might think that if the vehicle apears as it's not fitted with headlamp levelling it should pass regardless of the modified lights hence the subject of this thread. A whole MOT mess IMO
 
sierrafery said:
I didnt say it isnt correct just that its strange that it failed just for the sdjustment while as you say it should have failed cos the lights are not original regardless of adjustment. Based on this failure the OP(or others too) might think that if the vehicle apears as it's not fitted with headlamp levelling it should pass regardless of the modified lights hence the subject of this thread. A whole MOT mess IMO
Click to expand...
Yep
Putting in a modified vehicle for MOT is mostly going only one way nowadays
 
You must log in or register to reply here.

Similar threads

yfo866
Bespoke LED 72 round headlight units.
Replies
8
Views
820
300bhp/ton
300bhp/ton
Margo Ledbetter
Newbie query about 90 lights
2 3
Replies
44
Views
3K
yfo866
yfo866
B
Central Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3
Replies
5
Views
3K
discool
discool
Intestinalworm
Disco 2 Both Main Beam Headlights Stopped Working
2
Replies
31
Views
6K
Intestinalworm
Intestinalworm
dinisrosa
Defender td5 10P - no air pressure
2
Replies
38
Views
3K
dinisrosa
dinisrosa
Back
Top