Lowering ride height on 90/110 chassis

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

Chazza

New Member
Posts
7
Ok, so as you lot know I'm shiny-brand new to the forum, so go easy... :D

As my post title suggests, I'm trying to find out how possible it is to lower the suspension on either a landrover 90 or 110 chassis is, and what sort of work is involved. Im not a metal work or fabrication genius, but I do know my way around Landrovers pretty well.

I ask this, not because I want to defile or ruin a trusty 'Rover, but I want, in the end, to create a custom hot-rod.

Now, my budget isn't massive, and it's a looooong project over a few years, but in order to withstand 500hp+ and 700lbft, and with a physically large engine I need a big start point. Hence why a landy ladder chassis is perfect for the task. When stripped bare, it becomes easy to reinforce with braces, custom mount engine and gearbox, and figure out steering and braking assemblies.

So, if there is anyone on here who has done it successfully, or has a website where I can get some info, I'd appreciate it!

Thanks guys,

Chaz
 
oh gawd:doh:
 

Attachments

  • dyn010_original_450_300_pjpeg_2585886_3f4ea12e28111bc486a2fc1cb021ee40.jpg
    dyn010_original_450_300_pjpeg_2585886_3f4ea12e28111bc486a2fc1cb021ee40.jpg
    15.6 KB · Views: 7,045
Last edited:
I can't believe there are people out there thick enough to think that defenders and series vehicles would make good chelsea tractors. Worse still are those who think they can make a hot rod out of them. It has been 63 years since the land rover came out, and 63 years since mankind established that they are absolutely AWFUL on the road, and always will be. And it's not as if these "slammed" series 1s look good.
 
Go, find yourself any old Volkswagen, let that poor landy go and use it as a pulling vehicle for your Trailer Queen!
 
Wow. You lot are super awesome....

Look, I'm not a **** head, but I do work un-sociable hours.

I know you lot on here seem to think that if it isn't up to the headliner in ****, mud and bog water, it isn't a real land rover, and thats cool. All I wanted to know, was just how easy it would be to lower a land rover CHASSIS.

I DON'T want a 'low-rider' landy. Yeah, alot of fabrication goes into them, but it's not my bag. The end product would be transferring over a donor shell, or custom making fiberglass body panels. I'm not sure yet either way.

I joined this forum to get a link or something similar over to an engineering firm, or even pictures of the bare chassis that has been lowered, to see how they went about it. But yeah, I could always put 2 tonnes of sharp sand in the back.

Cheers for that...

Just so you know, the whole point of starting out with a monster beefy chassis, such as a 90 / 110, is so that I could fabricate supports, weld braces, and build a solid car, capable of ripping my face off, but reliable everyday.
 
Chazza said:
Wow. You lot are super awesome....

Look, I'm not a **** head, but I do work un-sociable hours.

I know you lot on here seem to think that if it isn't up to the headliner in ****, mud and bog water, it isn't a real land rover, and thats cool. All I wanted to know, was just how easy it would be to lower a land rover CHASSIS.

I DON'T want a 'low-rider' landy. Yeah, alot of fabrication goes into them, but it's not my bag. The end product would be transferring over a donor shell, or custom making fiberglass body panels. I'm not sure yet either way.

I joined this forum to get a link or something similar over to an engineering firm, or even pictures of the bare chassis that has been lowered, to see how they went about it. But yeah, I could always put 2 tonnes of sharp sand in the back.

Cheers for that...

Just so you know, the whole point of starting out with a monster beefy chassis, such as a 90 / 110, is so that I could fabricate supports, weld braces, and build a solid car, capable of ripping my face off, but reliable everyday.
Click to expand...
google is yr friend;)
 
a number of years ago I saw a well slamed 80 with lights behind the grill. the pipe and slipper guys didnt like it:D:D:D. was at one of the surrey street rod meets at brooklands, will see if my mate still has the pics. it did look sooooooooooooooooooooooooooo coooooooooooooooool:cool::cool: and I have a mate who has been toying with slamming his 90 to the deck, :cool::cool:
 
I've been Googling alot, but there's only so much I can handle!

I'm after some pretty specific information, so it becomes less accurate.

juicyv8 - are you a REME bloke by any chance...? Bordon ay...? And thanks mate, either way apprieciate you looking around for info.

Noeyedear - don't want the chassis to be scraping on the floor, but low enough to pass for a 'normal' car.
 
You must log in or register to reply here.

Similar threads

OlympicLiftingPaulF
Having a new chassis on my 90 - and what else......?
Replies
5
Views
347
Knappster
Knappster
M
Land Rover 90/110 V8 project wanted.
Replies
7
Views
1K
ManLanV8
M
R
Modified tow bars
Replies
3
Views
740
dag019
dag019
S
Chassis swap
2
Replies
28
Views
2K
shaynecm
S
L
Replacement chassis
Replies
11
Views
2K
MrF
M
Back
Top