finallysnapped
Well-Known Member
- Posts
- 1,127
- Location
- East Lothian
Right so obviously in the snow/ice/slippy stuff you want the highest gear possible and therefore high range.
Now for instance there's some frozen hard slush stuff that I'm not slipping on but stuck on and I just stall in first gear trying to drive over it, is that the type of situation I should use low range in?
I may not have explained that right. Here's the long winded explanation... the snow has been deep here last week and then again today but all the road slush has frozen and is still deep. Obviously the well worn tyre tracks aren't as deep and there's a rut in the middle between the tracks lots of compacted slush and snow to the sides. I was trying to drive onto that compacted stuff so that I could reverse into my driveway, but the disco was having none of it and stalling in first and reverse, that's why I figured maybe I should low range for a bit of extra oomph on it.
Now for instance there's some frozen hard slush stuff that I'm not slipping on but stuck on and I just stall in first gear trying to drive over it, is that the type of situation I should use low range in?
I may not have explained that right. Here's the long winded explanation... the snow has been deep here last week and then again today but all the road slush has frozen and is still deep. Obviously the well worn tyre tracks aren't as deep and there's a rut in the middle between the tracks lots of compacted slush and snow to the sides. I was trying to drive onto that compacted stuff so that I could reverse into my driveway, but the disco was having none of it and stalling in first and reverse, that's why I figured maybe I should low range for a bit of extra oomph on it.