L322 Looking for rear Lower balljoint/bush extraction tool

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
H

hlaverty

Member
Posts
37
Location
Livingston, Scotland
Hi, my 2002 L322 has failed it's mot, one of the failures was the rear outer balljoint bushes (both sides), I have tried the home remedy approach to pulling/extracting the bushes with no luck, I am looking for someone, within a reasonable distance of Livingston, who may have the extractor and is will to lend, hire or sell me the tool, or if anyone knows someone in Scotland that hires these out that would also be useful (I have checked my local plant hire but they don't do anything this specific)
 
This is the set i used, worked just fine :)
Used the same set to do top and bottom and I also changed my track control arms as they were seized up solid and the kwik fit man couldnt undo the bolts to adjust the rear tracking although i had to cut the bolts off each side on the inner track control arm using an air hack saw or you could use a 1 mm cut off disc in an angle grinder.
when you put the bolts back in the top and bottom MAKE SURE THE HAND BRAKE IS OFF, as I didn't and struggled like billy until I released the handbrake.

http://www.ebay.co.uk/itm/UNIVERSAL...518616?hash=item2ee7be85d8:g:-FoAAOSw~bFWL5RY
When you are done you can sell them to Alan as a butt plug set...
IMG_1925.JPG IMG_1928.JPG
 
Last edited:
holidaychicken said:
This is the set i used, worked just fine :)
Used the same set to do top and bottom and I also changed my track control arms as they were seized up solid and the kwik fit man couldnt undo the bolts to adjust the rear tracking although i had to cut the bolts off each side on the inner track control arm using an air hack saw or you could use a 1 mm cut off disc in an angle grinder.
when you put the bolts back in the top and bottom MAKE SURE THE HAND BRAKE IS OFF, as I didn't and struggled like billy until I released the handbrake.

http://www.ebay.co.uk/itm/UNIVERSAL...518616?hash=item2ee7be85d8:g:-FoAAOSw~bFWL5RY
When you are done you can sell them to Alan as a butt plug set...
View attachment 99205 View attachment 99206
Click to expand...
It won't be big enough from what people say.:p and I wouldn't touch anything you have had your hands around, slag.:D:D:D
 
tomcat59alan said:
If you buy from the people in the link then do so with confidence. Had a problem with a torx socket set, one broke, full refund as they couldn't replace the item.
Click to expand...
Oh good morning Alan I dread to think how you broke it............

tomcat59alan said:
It won't be big enough from what people say.:p
Click to expand...

You could leave them in the box i suppose :eek::D
Apologies OP, i forget that everyone on here aren't as twisted as us.:)
 
Morning Andy, lovely to know I'm always on your mind. I forget my own strength sometimes, had the torx set for 9 months and they couldn't replace the broken one so gave me a full refund.:D Us, twisted? I thought everyone was the same as us.;):D
 
Well this forum could never be accused of being stuffy or clicky, or professional, mature, sensible, boring.............:)
 
I have the Land Rover tool for the upper bush lying around in the garage somewhere if you want it but unfortunately I don’t have the tool for the lower one.

LRT-64-025_1.jpg


LRT-64-025.jpg


LRT-64-025_2.jpg


Phil
 
You must log in or register to reply here.

Similar threads

A
P38A Mot woes - upper and lower hub carrier balljoints etc
Replies
16
Views
2K
RangeRoller dt
RangeRoller dt
Saint.V8
L322 Rear Bush Removal Tool Loan
Replies
2
Views
519
Mark Piercy
Mark Piercy
Nodge68
Freelander 2 (LR2) LR trouble codes.
Replies
6
Views
29K
Keith Kernow Kernewick
Keith Kernow Kernewick
J
Re: Bush supports forest fees, and privatization of your public lands
Replies
0
Views
1K
John
J
S
Are japs controlling the Blue Ribbon Coalition?
Replies
3
Views
2K
R
R
Back
Top