Locking wheel nut key

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

jonmyates

Member
Posts
21
Hello all,

I've come to change a tyre on my 110 (1998) and I can't find the locking wheel nut key. Plus, it seems to be a non-standard design. I've attached a pic, does anyone recognise the make or know where I could get the key from?

Thanks,

Jon
 

Attachments

  • lock1.jpg
    lock1.jpg
    9.6 KB · Views: 331
  • lock2.jpg
    lock2.jpg
    12.7 KB · Views: 390
Hello all,

I've come to change a tyre on my 110 (1998) and I can't find the locking wheel nut key. Plus, it seems to be a non-standard design. I've attached a pic, does anyone recognise the make or know where I could get the key from?

Thanks,

Jon

Smack an old socket over it with a hammer. It should grip enough to undo it.
 
Hello all,

I've come to change a tyre on my 110 (1998) and I can't find the locking wheel nut key. Plus, it seems to be a non-standard design. I've attached a pic, does anyone recognise the make or know where I could get the key from?

Thanks,

Jon

I used to have locking nuts/bolts like that in the early 90's, no idea what make they were.

Being as you can get at it easilly I would try a good pair of Stilson's (A must in every toolbox, any tool merchant should sell them), they should have it loose in seconds.
 
Hi I had a similar problem 2 weeks back with my Impreza. The advice given was the same, hammer a socket on or Stilsons. Unfortunately neither was successful, I hammered a socket on but the wheel nut was too tight and the socket couldn't grip. I n the end I bought these: 5 Piece Bolt Grip Set - expansion set - Machine Mart

You hammer them on but they have teeth inside which cut groves into the nut/bolt and whip them off no problem!
 
Hi I had a similar problem 2 weeks back with my Impreza. The advice given was the same, hammer a socket on or Stilsons. Unfortunately neither was successful, I hammered a socket on but the wheel nut was too tight and the socket couldn't grip. I n the end I bought these: 5 Piece Bolt Grip Set - expansion set - Machine Mart

You hammer them on but they have teeth inside which cut groves into the nut/bolt and whip them off no problem!

I've got a couple of sets of them myself. They are preety good on wheel nuts. You can also get sockets that cut a thread in as you try and undo em. Looking at the nuts he has though a socket should work as there's plenty to grip onto.
 
They look like the Landrover locking nuts to me, they have a letter stamped on them, if it has you can just buy the correct adaptor.
like this one on ebay
 
Why not just pop along to your nearest friendly tyre-change place? They have it off in seconds either with the correct key or an appropriate tool and should be able to advise on what the key is, even if they haven't got it. I'd really be looking to find the right key as presumably you've got the same nut affixed to at least three other wheels. It does indeed look like an LR type - I had something looking very much the same on my Hippo.
 
thrash an impact socket onto it and undo it

the wheel nut is one that paddocks sell and they dont have any id on them its only the adapter that does i had the same problem

took all the nuts off ,bought a new set :( and a spare adapter just in case
 
Back
Top