Light problem

Zorro123 · Dec 20, 2010

New landy owner could use some help plz

Im having a light problem with my 1993 2.5td 90 drivers side stop & tail light, fog light plus drivers side side light dont work, have checked and replaced the bulbs but no difference...Anybody got any ideas why the lights on just one side of the car would'nt be working????

fanatic · Dec 20, 2010

check these places
1)right hand front chassis leg as loom enters
2)right rear chassis where loom exits
3)lift rubber flap in wheel arch behind lights -check body seam not sawn through loom as mine did.

Zorro123 · Dec 20, 2010

Thanks for the advice will have a look

Lumberjack Pad · Dec 20, 2010

Also check relay behind dash instruments (speedo, fuel guage etc). Similar thing happened to me and it was that relay.

Zorro123 · Dec 20, 2010

Will have a look at the relay but would that only affect the one side?

fanatic · Dec 20, 2010

Zorro123 said:
Will have a look at the relay but would that only affect the one side?

yes and rear body seam behind lights prime for eating through loom

sible88 · Dec 20, 2010

Sounds silly wiggle the fuses the left and right are separate

Lumberjack Pad · Dec 20, 2010

Zorro123 said:
Will have a look at the relay but would that only affect the one side?

sorry

just re-read, didn't realise it was just one side :doh:

Zorro123 · Dec 21, 2010

Thanks for all the help, turned out that the last owner when he renewed the side and tail lights did'nt bother to use proper connectors instead just twisted the wires together :crazy: so one of them was causeing a short so problem solved

Light problem

Zorro123

New Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Zorro123

New Member

Lumberjack Pad

New Member

Zorro123

New Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

sible88

New Member

Lumberjack Pad

New Member

Zorro123

New Member

Similar threads