STUMPJUMPER
New Member
- Posts
- 14
can anyone tell me the diameter of a kumho kl71 245/75/16 please i am wishing to fit some to my standard rrc (no lift kit etc) but have been told they might catch my wheel arches.any help most appreciated.
kumho kl71
- Thread starter STUMPJUMPER
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Even if its not a Disco, the diameter of the tyre is going to be the same so this will partly help:
http://www.landyzone.co.uk/lz/f8/what-tires-can-i-put-my-disco-43706.html
it links to Disco Tire Fitting Guide which suggests 30.6 inches. Tyres vary slightly from brand to brand, due to the depth of tread when new.
http://www.landyzone.co.uk/lz/f8/what-tires-can-i-put-my-disco-43706.html
it links to Disco Tire Fitting Guide which suggests 30.6 inches. Tyres vary slightly from brand to brand, due to the depth of tread when new.
camoland
New Member
- Posts
- 23
- Location
- merseyside
ive got a set of kl71 khumos on 16inch alloys which im selling if there still in the unit ill measure them for you before they go ? pm me if you still need the measurements
STUMPJUMPER
New Member
- Posts
- 14
thanks for that chaps.
- Posts
- 44,915
- Location
- Hornchurch
too big for a std rangie. 235/65/16 will fit but slightly rub on full articulationI looked at kumhos but they dont do that size.Slitty tire for a slitty motor
khaos
New Member
- Posts
- 2,907
- Location
- Sheffield, South Yorkshire.
The way you work it out is multiply the width by the wall percentage. So do 245*.75. Then double it because you have a wall top and bottom then add the rim on. 16 inches is about 400 mill. That makes the total size about 767.5 mill.
