What are the symptoms related to a bad ignition lock cylinder?
When the
ignition switch lock cylinder fails, the ignition switch may very well work, but it may be difficult to find out, as the lock cylinder can fail to release when the key is inserted. This creates a situation where the
ignition cannot be turned, or takes much wiggling and shaking before it finally turns. If that is not the problem, perhaps the ignition will turn no matter what, runs with the key removed, and allows the key to be removed in any position. In this situation, the vehicle is much easier to repair, since the lock cylinder can be removed without removing the steering column. Lastly, the lock can fail to release your key, or not allow the key to travel all the way into the ignition lock cylinder. In these frustrating scenarios, the repair may be a little easier as well, since lubrication usually releases the lock cylinder.
https://www.jansenlarodemontage.nl/...ObjectPath=/Shops/62878179/Products/qrj100230