Key Help please.....

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

bugs

New Member
Posts
9
Location
Devon
Ok so I've done loads of searching and found results but none of them seem to work.

So here goes....

'03 Discovery, TD5 XS with one '2 button Landrover key fob'.
Led on fob works but it won't control the locking/ unlocking of the motor.

Is it looking like taking it to dealer or independent or dont bother at all and just use the key like olden days.......:doh:

Please help...:rolleyes:
 
Ok so I've done loads of searching and found results but none of them seem to work.

So here goes....

'03 Discovery, TD5 XS with one '2 button Landrover key fob'.
Led on fob works but it won't control the locking/ unlocking of the motor.

Is it looking like taking it to dealer or independent or dont bother at all and just use the key like olden days.......:doh:

Please help...:rolleyes:


Mr. Discool has a point...even if your Disco isn't within the MY's of those of the bulletin it's a goof info and i saw facelifted D2's with the same problem > http://www.landroverclubvi.com/uplo...odule_troubleshooting_and_upgrade8610nasf.pdf
 
I have a nanocom and so if you are ever in the Bristol area I'm happy to hook it up and do the RF test / reprogram the BCU to the key again for you.

Ben


Hi Ben,

Very kind of you indeed, and may well, take you up on your offer :D

Thanks
 
It could be the receiver that's up above the rear head lining they have been known to go faulty, a LR garage will/should be able to test it otherwise it's a 'replace and see'.


Managed to get the key fob checked for any output and it seems to be working fine.

Can you just get the key recoded with one of these nanocom meters?? or is there another way of doing it DIY style, or is it more likely to now be the receiver in the roof lining????:eek:
 
Plugging a diagnostics tool like testbook or nanocom etc into the car let's you test if the RF unit is working and let's you program keys to the car.

There is no way to add a key to the car without programming that I am aware of. Nanocom allows you to do it with the code printed inside the key. Testbook requires you to have the bar code that comes with a new key. Not sure about others like hawkeye etc.

If the key is programmed already (which you would expect it to be in your case) then it should not need doing again if for instance it was the RF unit at fault and you replaced it.

Regards

Ben
 
Hi Ben,

thanks again mate for advice,

sounds like it could be the rf unit then?? can this be checked out by anyone other than landy dealer

May it of been fried by jumping the motor with a jump box??

Cheers
Ash
 
Back
Top