Key doesn't lock or unlock car manually

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

SpanishTony

Active Member
Posts
297
Location
Cheshire
1998 2.5 DSE

As title suggests, my key will lock and unlock on pressing the fob buttons, but not when I place the key in the drivers lock and turn it.

Normally this wouldn't be an issue but recently, occasionally when pressing the fob buttons the car doesn't unlock. Once I get into the car, don't ask how, I get the press remote button message when the key is in ignition before I can start the car.

Leaving the car unlocked is not the ideal solution.....
 
Mine had a similar problem. It would unlock with the key, but not lock.

Took the door card off, and the drivers door handle out.

At the back of the key barrel someone had fitted a bit of metal strip. Drilled to screw into the back of the barrel, and with a hole in it for the actuator rod.

Unfortunately the metal was moving when trying to lock, not pulling the actuator rod.

I simply drilled an extra hole and added an extra screw so the metal strip always turned with the barrel.
 
Probably have more luck trying to open the car with a bible in one hand and some holy water in the other

Locking and unlocking the drivers door with the key is mechanical. If the key will not lock and unlock it. Something is wrong with the mechanical locking mechanism. You don't even need to have a battery on the car to lock and unlock the drivers door with the key.
 
Back
Top