Iuzu 2.8 conversion help needed !!!

hi all ,
new to landy zone as of last night .
every one seems friendley and very helpfull so hopfully someone can help me .

I'v just taken a 3.3l perkins out of my rr as its just so slow and was not fitted properly to begin with.
i'm putting a 2.8 Isuzu back in and i need a few pointers .

I.E
.engine mount
.wires and where to put them
.breather pipes and control modules
.4 speed gbox with over drive or my R380 with 1.92/1 transfer box

any help or pointers will be received with thanks .

Try googling conversion and precision they do or did the conversion kits, if they are still on the go they might have some tips, not sure but think another company was dudliegh enginering or some such name did them. (good engine by the way)

ok i give them a try thanks for the advice .