Is this a Disco 1 Steering guard??

I removed this steering guard off a disco 1 some time ago. I've just tried fitting it to my new disco 1 and can't for the life off me see how it should go on. Either I'm missing the obvious or the previous disco had been modified to take it.
Measurements as follows:
Lower mounting points are 79.5cm apart
Upper mounting points are 83.5cm apart
Centres from each mounting hole are 22cm
If it's not off a disco 1 does anyone know what it is off??
Any advice gratefully received.

M8CPK said:

I removed this steering guard off a disco 1 some time ago.
If it's not off a disco 1 does anyone know what it is off??

Click to expand...

contradiction there my friend

dunno if it helps but heres mine fitted

I fitted one bout 5 or 6 months ago and it looks right to me two of the bolts are at the very front of the chassis you will have to pull old bolts out to slide steering guard in first, the bolt hole on the guard with the kink in goes on the chassis where the steering box or arm or something like that is and on the other side you should already have an empty hole on the chassis where said steering component would be if it was LHD. Hope you can figure it out