Hard Drive
Active Member
- Posts
- 145
- Location
- York
Might anyone have the resistance readings for the FL1 Td4 2004, Inlet Air Temperature Sensor, across the range?
I have two sensors, one in use and the other as a spare. When both are together for a lengthy period, rendering each to an ambient temp, there is a marked difference.
One is 7.25 Kohms, while the other is 6.25 Kohms.
What I require is a chart for varying temps according to set temps to see if either or both might be in or out of range.
Thanks.
Also, what might be the best way to clean such a device without damaging it?
I have two sensors, one in use and the other as a spare. When both are together for a lengthy period, rendering each to an ambient temp, there is a marked difference.
One is 7.25 Kohms, while the other is 6.25 Kohms.
What I require is a chart for varying temps according to set temps to see if either or both might be in or out of range.
Thanks.
Also, what might be the best way to clean such a device without damaging it?
Last edited:
