Hi folks, am halfway through getting my 200tdi engine back together after the outer crank pulley came loose and destroyed my front woodruff key. I have got the cambelt off, repaired the crank and i am about to get the new crank pulley and cambelt back on (when the parts finally arrive) Anyway i was checking all of the pulleys etc were as left...and the injection pump seems to have moved a few teeth but i cannot get it back into position, in hindsight is sounds like i should have pinned it in place but i need to get it back to its old position to ensure that it runs nicely. Should it just turn back by hand? Do i need to rotate itclockwie back to the correct position? any help would be greatly appreciated, cheers