This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
H

Profile posts Latest activity Postings About

  • Did you receive the crank ok?here is some figures I got when timing the cam
    exhaust
    0.8mm@5 btdc
    0.7mm@10btdc
    1.1mm@15btdc
    1.6mm@20btdc
    2.5mm@25btdc
    3.95mm@30btdc
    1.25mm@ tdc
    Intake
    1.4mm@5atdc
    1.35mm@10atdc
    1.6mm@15atdc
    2.1mm@20atdc
    2.95mm@25atdc
    3.5mm@30atdc
    1.65mm@tdc
    Do you think these figures are to close?
    Set with zero preload on the lifters
    Cam is a piper v846bp285 ,set at 110 degrees on full lift
  • Loading…
  • Loading…
  • Loading…
Back
Top