Immobiliser and central locking

Hi. Just swapped all wiring looms and dash into another body and chassis. Started up first time but now immobiliser wont come off and key fob wont work?
Then central locking lock and unlocks itself constantly

any idea what could be wrong

Did you swap the BCU, interior fusebox and ECU too ?

sierrafery said:

Did you swap the BCU, interior fusebox and ECU too ?

Click to expand...

Yes im sure i swapped everything. Noticed central locking locking and unlocking itself and then wont start afterwards like its shutting it self down.

Won't start how? it doesnt crank? ... change the RF receiver anyway to be ruled out

sierrafery said:

Won't start how? it doesnt crank? ... change the RF receiver anyway to be ruled out

Click to expand...

No crank or anything. I think ive found my issue of a faulty door latch on the rear shutting out the central locking of the car. Ill see tomorrow

I doubt that a rear door latch can stop the fobs to work

It seemed to be confusing the central locking and stopping it working. As soon as i unplugged the door it started working again. Maybe it reset the module or something. Ill have another look in the morning

may help THAT WHAT YOU GET IF NO INFO ON WHAT MODEL YEAR ETCDID NOT PICK UP PHYSIC TRANSMISSIONS HENCE ASSUME D2

mystery said:

may help View attachment 199768 View attachment 199769

Click to expand...

Hi mate mines the discovery 1 and ive seemed to fix my issue now thanks

I just had a bit of a problem with immobiliser. Fault Code p1df5. Car immobiliser wouldn't deactivate.

Disconnected battery. Put headlights on to drain remaining power to computer.
Waited 5 minuts. Reconnected. Waited 5 minuts and then all was good.

Essentially rebooted computer to factory settings.
Worked for me. Could be worth a go.

now i know the model