fashionfunky
New Member
- Posts
- 11
Does anyone know if (like the Haynes manual says) you have to drill out two screws in some mounting / assembly to remove the ignition switch?
Ignition switch removal.
- Thread starter fashionfunky
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Darmain
Well-Known Member
- Posts
- 2,366
- Location
- Chippenham, Wiltshire
We will find out at the weekend Fashion, when we attempt this operation on our respective Hippo's 
No need for a new thread BTW. Keeps things tidy.
Good luck.
No need for a new thread BTW. Keeps things tidy.
Good luck.
Chaser
New Member
- Posts
- 2,175
That sounds like a reference to the shear bolts holding the steering lock to the column rather than removing the ignition switch from the lock.
Darmain
Well-Known Member
- Posts
- 2,366
- Location
- Chippenham, Wiltshire
I think you are right Chaser. I've had a look at Haynes and it seems that the lock body involves non-removable shear bolts that need drilling out. The switch has been removed before that stage. Should be alright then for a switch only service.
Many thanks,
Dave
Many thanks,
Dave
