these might be an option. no idea how strong they are.. 3mm?
Land Rover Defender 90 & Series SWB Sill Rail - YRM Metal Solutions
Land Rover Defender 90 & Series SWB Sill Rail - YRM Metal Solutions
I'd like some 'disguised' rock sliders that look like normal sills, do they exist?
- Thread starter oli1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Thats a standard bit of bodywork which supports the seat box on all fenders and series and probably only 1.5mm at best!
As this seems to now be a contest I've had 7 x series 2's, 4 x series 3's, 2 x 110's, 4 x 90's, 1 x lightweight, a 6x6, a Range rover and a Disco.
And despite this I still look for options of how to make my 90 look standard while still having stronger sills....weird isn't it
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I can make some HD sills that look normal but will take a little bit of a hit 
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Very. The words Anal retentive springs to mind..
That's far more polite then the words that spring to my mind!
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
I could make them but I'm too busy right now, ask again in a couple of months
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Self analysis is good. But try not to be too hard on yaself..
Well this could go on and on, I'm calling it a night
Catch you tomorrow
- Posts
- 1,692
- Location
- towie hell
I could make you some by using folded odd leg angle so its still strong but will sit back and let you retain the floor sills(galv bit of steel floor bolts to.
Hmmm product idea but then maybe not as who else would want flush sliders
Hmmm product idea
but then maybe not as who else would want flush sliders
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I could make you some by using folded odd leg angle so its still strong but will sit back and let you retain the floor sills(galv bit of steel floor bolts to.
Hmmm product idea
I was gonna use 5mm folded channel with 45* strengtheners at 1/3 and 2/3 way back
angle may be easier though
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
I could make you some by using folded odd leg angle so its still strong but will sit back and let you retain the floor sills(galv bit of steel floor bolts to.
Hmmm product idea
I personally don't as I wanna bounce off trees
but I can see why some would want to 
Bede
Active Member
- Posts
- 153
- Location
- Stoke On Trent
#### me Dr Evil - are they sliders or wings? You'll need a police escort for a wide load if you put them on.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I could make you some by using folded odd leg angle so its still strong but will sit back and let you retain the floor sills(galv bit of steel floor bolts to.
Hmmm product idea
There's always one
ere while ya here PM me a price for an HD crossmember for me 110. I'm getting a noo chassis (well old noo.) and wanna change the crossmember.
Last edited:
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
They's heavy duty in the highest sense of the word
Tech that used to work on challenger tanks said they looked about the same thickness as the ones he had on them
Bede
Active Member
- Posts
- 153
- Location
- Stoke On Trent
I assume you'll be putting solid fork lift truck tyres on your motor?!
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
DTd5
Active Member
- Posts
- 723
- Location
- North Devon
They is for my series
I think you may need to fix a "Wide Load" sign on the back of the Series!!
