- Posts
- 13,678
- Location
- The Principality
I've left part of the shopping on the roof and driven off. No idea what happened to the items!
I need a t-shirt
- Thread starter donk56
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DiscoPol
Well-Known Member
- Posts
- 6,376
- Location
- The Land of Po
When I was about 20 ish (so a long time ago) I was doing some driving for an electrical wholesaler delivering some 8ft fluorescent tubes, from recollection over a thousand of them.
They were boxed in 25's and i do remember that I had to trawl round about 7 different branches of the company to collect everything they had to fill the order. It filled the van i had at the time which was a renault traffic so had to resort to putting about 6 boxes on the roof rack from the last branch i went to, all strapped and bungied down but you cant go too tight with thin glass tubes.
well on the way to deliver to the customer all was well until some numpty slammed on in front of the truck in front of me and obviously i had to do the same only to see 24 8ft tubes launching from the roof rack like a missile battery, one of the boxes had been opened and one tube take out and not sealed up again, like a tw@t I hadnt seen this when loading the box so had put it on the rack facing forwards.
luckily it was only the back door of the truck in front that got a barrage of glass flung at it but i wasnt allowed to forget about that one in a hurry by the office.
I can still see it happening now if i close my eyes.
They were boxed in 25's and i do remember that I had to trawl round about 7 different branches of the company to collect everything they had to fill the order. It filled the van i had at the time which was a renault traffic so had to resort to putting about 6 boxes on the roof rack from the last branch i went to, all strapped and bungied down but you cant go too tight with thin glass tubes.
well on the way to deliver to the customer all was well until some numpty slammed on in front of the truck in front of me and obviously i had to do the same only to see 24 8ft tubes launching from the roof rack like a missile battery, one of the boxes had been opened and one tube take out and not sealed up again, like a tw@t I hadnt seen this when loading the box so had put it on the rack facing forwards.
luckily it was only the back door of the truck in front that got a barrage of glass flung at it but i wasnt allowed to forget about that one in a hurry by the office.
I can still see it happening now if i close my eyes.
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
Renault Traffic when you were 20? Who you trying to kid, those didnt even exist in the 40's
DiscoPol
Well-Known Member
- Posts
- 6,376
- Location
- The Land of Po
- Posts
- 83,230
- Location
- Embasinga stocæ
:hysterically_laughi can picture that happening.
I was collecting some soil pipe for the local building firm I was working for a couple of years ago and was using their ldv pickup so loaded them tight to the tailgate and onto the ladder bar on the front of the tipper bed only had some blue rope to secure them so tied them tight (or so I thought). as I was driving back to the site I clocked the shadow of the van and saw the pipes in the shadow and thought they looked a little weird but continued. when I arrived at the site the pipes and slipped about so my 'secure' roping had allowed them to shift so that they were diagonally across the bed of the van. won't be making that mistake again
janderson41
Active Member
- Posts
- 442
- Location
- Howwood Renfrewshire
Taking caravan back to storage. Left control for motor mover on disco back bumper and set off.
Got to storage yard,nocontrol anywhere. Had to push van by hand.eventually remembered leaving control on bumper. Searched an found control about 2 miles from house and run over
It still worked after putting. It together by tape.
Cost me £70 for a replacement.learning by disco is expensive
Got to storage yard,nocontrol anywhere. Had to push van by hand.eventually remembered leaving control on bumper. Searched an found control about 2 miles from house and run over
It still worked after putting. It together by tape.
Cost me £70 for a replacement.learning by disco is expensive
pontyslapper
Brought a Landy to LZ11. Yay!!
- Posts
- 1,382
- Location
- Pontypridd
I unintentionally left an empty coffee paper cup on the wing of flatlanders landy during LZ10. I think said cup made it into photos and filums. Kind of like a recycling photobomber.
Left my phone on the front wheel of me disco overnight once after photoing the underside. Forgot and drove over it next morning while having it rung. It survived thanks to the sixteen quid chinese metal mil case thingy I've wrapped it in. Kills the signal and battery mind!!
Left my phone on the front wheel of me disco overnight once after photoing the underside. Forgot and drove over it next morning while having it rung. It survived thanks to the sixteen quid chinese metal mil case thingy I've wrapped it in. Kills the signal and battery mind!!
disco147
Well-Known Member
- Posts
- 1,147
- Location
- Chichester, West Sussex
I was using my phone as a torch one night whilst tipping the excess cr*p off the back of an 18t tipper lorry, put my phone back in my pocket, drove the lorry forwards to park it up then went to get my phone out my pocket.
I can only imagine I missed my pocket in the dark because I found my phone, ringing, in the mud, in the shape of a banana where the back wheels had driven over it :doh:
I can only imagine I missed my pocket in the dark because I found my phone, ringing, in the mud, in the shape of a banana where the back wheels had driven over it :doh:
- Posts
- 9,121
- Location
- A bit sarf of Dorking
Surely I'm not the only person to:-
Remove swivel ball by loosening and removing awkward 15mm bolts.
Extract bearing race and bush, discard.
Freeze replacements overnight.
Warm ball in oven.
Fit new bearing race and bush.
Refit ball, and effing 15mm bolts. Destroy favourite 15mm ratchet ring.
Refit everything bar the brake drum.
Stop for coffee.
Return and think 'that doesn't look right'.
Dismantle while cursing the muppet that thought it a good idea to have the bush and bearing holes the same effing size, thus allowing effing muppets like me to fit them upside down.
Reassemble.
Buy new 15mm ratchet ring, knowing that you can never love it because of the circumstances surrounding its' purchase.
Remove swivel ball by loosening and removing awkward 15mm bolts.
Extract bearing race and bush, discard.
Freeze replacements overnight.
Warm ball in oven.
Fit new bearing race and bush.
Refit ball, and effing 15mm bolts. Destroy favourite 15mm ratchet ring.
Refit everything bar the brake drum.
Stop for coffee.
Return and think 'that doesn't look right'.
Dismantle while cursing the muppet that thought it a good idea to have the bush and bearing holes the same effing size, thus allowing effing muppets like me to fit them upside down.
Reassemble.
Buy new 15mm ratchet ring, knowing that you can never love it because of the circumstances surrounding its' purchase.
My neighbour has just won a t-shirt.
Been stood getting some stuff out of my vehicle. Saw my neighbours car starting to move off slowly and I thought......not like my neighbour to shout hello and I never heard him getting in.
Although I thought ignorant sod I gave a polite wave to the driverless car as it went past.
I was still stood with my hand up in the air which must of looked like a nazi salute as I stood motionless whilst watching my neighbours car mount the kerb several houses down, crash through the hedge and and came to rest in another neighbours front garden.
Turns out he forgot to put the handbrake on when he got in in the early hours of this morning leaving it in gear.
Been stood getting some stuff out of my vehicle. Saw my neighbours car starting to move off slowly and I thought......not like my neighbour to shout hello and I never heard him getting in.
Although I thought ignorant sod I gave a polite wave to the driverless car as it went past.
I was still stood with my hand up in the air which must of looked like a nazi salute as I stood motionless whilst watching my neighbours car mount the kerb several houses down, crash through the hedge and and came to rest in another neighbours front garden.
Turns out he forgot to put the handbrake on when he got in in the early hours of this morning leaving it in gear.
erm erm, thk christ its not just me that done that
also left the side door open once on the van and ended up with 2 x containers of copper fittings sprawled across the road, scrappy time i thought,lol
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
MrMayze
Active Member
- Posts
- 289
- Location
- Cheshire West
I've left the locking wheel nut key thing on the wheelnut and gone for a test drive.
Obviously it wasn't there when I got back I spent hours cycling round the estate trying to find it.
Obviously it wasn't there when I got back I spent hours cycling round the estate trying to find it.
I loaded our mini digger onto the trailer to take to a friends, half way though loading I took a phone call and put the phone on the trailer, finished strapping down and set off, it's only half way there that I went to find it to hand to my passenger when the realisation set in, ****. Thankfully due to the ridiculous rubber case it was still on the trailer
Weren't a Vauxhall with a daft electric handbrake were it?
Its was a alfa romeo 75. After all the years he's had it he never new it's had a recall on the handbrake....
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
1 litre of satin black rustoleum dropped on courtyard yesterday evening
Fortunately wife away this week, but even after loads of white white spirit, hard brush and jet wash you can still see where it's been
Fortunately wife away this week, but even after loads of white white spirit, hard brush and jet wash you can still see where it's been
