keithcanfixit
Active Member
- Posts
- 222
- Location
- Kent
Other option is to get a length of 4x2 timber, bore into end to insert breaker bar to a reasonable depth and use that in place of scaffold pole
P38A hub nut
- Thread starter ukadamwest
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,475
Shouldn't need Oxy-Fuel type of heat, generous amount with a blow torch, the nut isn't very big and technically it is only 192Nm in anycase!
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
- Posts
- 16,475
Stop repeating what I say...
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
- Posts
- 16,475
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
Oh yeah, that old charlie eh?
Yep yep..
in my defence i took extra time to resize the blowtorch picture, if i hadn't of i would 'ave posted sooner
keithcanfixit
Active Member
- Posts
- 222
- Location
- Kent
Just get out 2am in the morning with a cordless angle grinder on the nearest street sign pole, this I hasten to add is not condoned but as it is an emergency ?????
- Posts
- 16,475
That may be the way in Kent, but we live in Surrey, Darling.....
......... the local yoof's have already had 'em away
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
I 'ave a few stripper poles you can use
keithcanfixit
Active Member
- Posts
- 222
- Location
- Kent
Of course I forgot, all yours have already been nicked along with the speed camera poles ha ha
keithcanfixit
Active Member
- Posts
- 222
- Location
- Kent
Well you'll just have to" blow the bloody doors off", oh sorry, wrong film
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
by the way saint.. i now work just round the other side to the airport from you
- Posts
- 16,475
Which Airport?
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
A little one like this should do it..
im trying to undo a hub nut, no make a Crème brûlée
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
farnborough
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
- Posts
- 16,475
Oh....didn't know that! Welcome to the hood...
- Posts
- 18,962
- Location
- Buckinghamshire, UK. ('95 DT)
I went up my friendly Indy round the corner and got one of the lads to whip it off with the whizzy gun. Left them a tip and nipped it up enough to get home. They hammered it back up afterwards too. Saves a lot of effing about.
