How fooking much

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey

Pikey

Dummy Ejection Facilitator..
Posts
47,185
Location
in Baron Wet Bum's Slave pit..
I'm trying to sort out the lights on the replacement rear tub and it's got the later style lights. with the tiny pin connectors. Unfortunately My 90 Has the earlier style bullet connectors. So I've just got the part numbers and had a scout around and the 4 plugs with an extension tail, is going to cost near enough £50+VAT +P&P :eek: :eek: for 4 bits of wire and 4 ****ty plastic connectors :mad: :mad:

Anyone know a cheap supplier or anyone got a scrap 90/110 with these type of lights that wants to sell the plugs ??? they look like this.
 

Attachments

  • tn_STC4637_Lead.jpg
    tn_STC4637_Lead.jpg
    3 KB · Views: 276
  • tn_STC1188_Lead.jpg
    tn_STC1188_Lead.jpg
    3.1 KB · Views: 276
bustersbus said:
Just cut the plugs off and stick new bullet connectors on Red;) :D
Click to expand...

I've got the bullet connectors on the harness, but the lamps are the new type so the harness won't plug into the light fittings There's no wires coming from the lamps.:(

I need the plugs to plug into the lamps then I can cut the wires and fit bullet connectors to them.
 
Wouldn't it be cheaper to replace the lamps on the tub with the older type?
 
Yes But I'm going to have to solder a wire from the earth terminal on each lamp as hole in the new tub is bigger and the self tapper that goes thru the earth terminal misses the tub now. Thought if anyone had the plugs it would make life simpler and I'd be able to use the newer lamp fittings.
 
iannotts said:
Give the part numbers red and i'll see what i can do, £50 +vat sound fookin expensive .


Did ya get your bit today?
Click to expand...

Yes but it hasn't helped. I've PM'd you..

Part numbers for the plugs are

stc1188 indicator lamps extension harness x 2
stc 1189 tail/stop lamp extension harness x 2 (may have been superceeded by part no STC4637)
 
I had this problem too, and the newer ones have a fatter body. Ended up having to file the hole bigger and then I just cut the connector blocks off and crimped the wires together - simple!
 
You must log in or register to reply here.

Similar threads

J
LED lights
Replies
9
Views
2K
miktdish
miktdish
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
1K
sleepybear
S
P
L322 YET ANOTHER LCM ISSUE
2
Replies
22
Views
489
brianp38dse
brianp38dse
R
Series 3 Fuel gauge rollercoaster
Replies
4
Views
246
British Leyland Rover
British Leyland Rover
J
Smoking and low power.
Replies
13
Views
1K
JCP123
J
Back
Top