Horny question ;)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

chico929

New Member
Posts
171
Location
Norwich Norfolk
I dont know if they are all like it, but the horn on my `94 90 is pathetic. :eek:
Its embarrassing that a big tough looking Landy has such a soft, squeaky voice. I fancy putting a big feck off loud one on, not musical or `owt but a big `ol fog horn. Anyone done this? What did you go for?
 
HALFORDS air horns @ £15 cheap as chips + they work ok (keep the compressor well oiled ............ooooomissis)......1 live to the relay ,,trigger it with origonal horn wire ,,,1 earth wire,,1 wire to compressor find somewere to mount stuff,,,den bobs yer ferkin....used em on my rangie 7 years no bother...dave
 
If your thinking of putting in a set of truck horns (klaxon, air horn etc) in addition to the standard horns and have them controlled by a switch, similar to large HGVs here's what I did.

A lit switch in the cab, off/on type, with a feed from a permanent live (just for the fun of it when you're sitting there & you just want to wake someone up) otherwise it can be ignition controlled.

A 5 point relay (the one with 87 & 87a).
85 to Earth
86 from switch in cab
87 to existing horn (this is the feed that is constantly open) (replaces the existing feed)
87a to truck horn compressor (these could be reversed depending on relay type)
30 is the existing horn feed.

When switch is off standard horn works (good for MoT), switch on then the truck horn (siren, whistle or whatever takes your fancy). Certainly better for waking up some numptys.
BTW I had the truck horns from an old truck we ran & they are fitted on the passenger side behind the headlights.
 
Back
Top