Hi Lift Jack

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I bolted my jack to the front of the rear seatbox. It needs to go diagonally up to fit a swb, but I just put a bolt through one of the top holes in the ladder to keep it in place - also stops it moving about.

I put a carpeted fake seat front in place to hide it , which fits under the lip of the bench seat. I've done that to both sides - it turns the wasted space into a useful place to store tools without them all rattling and flying aboot in the back.
 
Moonie,
could you give us some photos? I have been looking to fit a hi-lift
on the back of the 'seat bulkhead' behind the seats on my lightweight.
The other option I have seen is to bolt it upright on the back bumper
but this is only on hardtops. I have also seen it horizontally on the front bumper.
I will be using an old rubber car floor mat that I will cut up to stop
it banging about.
I also plan to have a tommy bar attached in the same way but I am still
trying to get it all to fit. The tommy bar needs to go here as it wort fit in
tool box I have on the seat bulkhead between the back benches.
K.
 
I've put mine here;

DSC00572.jpg
 
Last edited:
kibodwin said:
Moonie,
could you give us some photos? I have been looking to fit a hi-lift
on the back of the 'seat bulkhead' behind the seats on my lightweight.
The other option I have seen is to bolt it upright on the back bumper
but this is only on hardtops. I have also seen it horizontally on the front bumper.
I will be using an old rubber car floor mat that I will cut up to stop
it banging about.
I also plan to have a tommy bar attached in the same way but I am still
trying to get it all to fit. The tommy bar needs to go here as it wort fit in
tool box I have on the seat bulkhead between the back benches.
K.
Click to expand...

Sure:

jarvis1.jpg


jarvis3.jpg
 
Last edited:
109party said:
nice setup under the seat the moonie
Click to expand...

Cheers, just using the wasted space. Otherwise I'd have the back full of tools and crap and no room to ever carry people or anything else.

90truckcab said:
yeah , apart from the old red / black cable, the 6491x is all harmonised colours now , hope yer not doing sneaky jobs with old cables ;)
Click to expand...

Just nicked the cable off the father-in-law to wire up my stereo and a couple of switches on the landy. The colours will likely tell you how long he's had it stashed away! :D
 
redhand said:
Yu'll soon knacker ya self out. I'd throw it in the landy if I was yu :D
Click to expand...


better had i spose, then again i'v used it more on tractors and fer pulling trees out than jackin me landys up ! yer only need to carry a bottle jack and a block of wood fer a flat really ! ;)
 
You must log in or register to reply here.

Similar threads

L
Bonnet Struts
Replies
2
Views
600
layfin
L
C
Axle Stands
Replies
8
Views
696
GrumpyGel
GrumpyGel
KB159
Machine Mart Jacks
Replies
6
Views
585
Knappster
Knappster
K
Wanted D2 bottle jack
Replies
12
Views
1K
Anaconda
A
A
Gearbox max 3rd in auto mode
Replies
1
Views
655
Bemble
B
Back
Top