jimbot90
New Member
- Posts
- 4,410
- Location
- notts/derbys area
no thank yu.
hi everyone :) help!!!
- Thread starter kimmy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
coventrygal
New Member
- Posts
- 26
- Location
- coventry
yea, my hubbies got a car spares shop in chelmsford - not that he knows much about cars lol just sells the parts!!
cars parked at his shop so im using his old defender - we'l have a go bit later- thought you might need special tools to get hub off??
what did it do on your disco?
cars parked at his shop so im using his old defender - we'l have a go bit later- thought you might need special tools to get hub off??
what did it do on your disco?
ok nick a haynes manual off him for a start so you know what you're looking at ! there will be a big nut holding the bearings in so either the right large socket or a hammer and chisel to move it...simple job as long as the remains of the bearings havnt welded themselves to the stub axle !
this might give you an idea.... i dont know a lot about freelanders but a hub is a hub I think ....have a lok at the link lots of pictures for you.
Google Image Result for http://forums.lr4x4.com/uploads/1181760640/med_gallery_2_313_952440.jpg
Google Image Result for http://forums.lr4x4.com/uploads/1181760640/med_gallery_2_313_952440.jpg
swampdonkey
New Member
- Posts
- 384
- Location
- a star system nearby
tinker all you like.....if it walks like a duck...and talks like a duck...then chances are its a duck! all be it a duck with a broken IRD
help - is this the IRD!!!!
been under the car tonight and found the lon thing down the car (prop?!) is hanging down and the rubber mount is broken allowing for lots of play.
Wiggled the wheels around, both sides are the same.
there is a major clonking noise now in forward and reverse from the front end of the car, can't tell exactly where from though?! Does this sound like the IRD or could it be other bearings, bushes?!? etc
any help welcome
been under the car tonight and found the lon thing down the car (prop?!) is hanging down and the rubber mount is broken allowing for lots of play.
Wiggled the wheels around, both sides are the same.
there is a major clonking noise now in forward and reverse from the front end of the car, can't tell exactly where from though?! Does this sound like the IRD or could it be other bearings, bushes?!? etc
any help welcome
- Posts
- 83,230
- Location
- Embasinga stocæ
Pics - we need piccies
"we like piccies"
:nopics:
"we like piccies"
:nopics:
****e - didn't take pics and car is 15 miles away at hubbys shop!!!
spoke to a lr dealer and he said he has only ever fitted 1 ird in the 10 years of working!?!
im at a loss as to what to do because i could get the car to them and cost me hundreds and hundreds just working through the prob before they even get to work on the thing!! should have trained as a mechani not a teacher!!
spoke to a lr dealer and he said he has only ever fitted 1 ird in the 10 years of working!?!
im at a loss as to what to do because i could get the car to them and cost me hundreds and hundreds just working through the prob before they even get to work on the thing!! should have trained as a mechani not a teacher!!
Similar threads
Freelander 1
Rear axle noise
