- Posts
- 3,257
- Location
- Near Heathrow.
Either bridging the relay, or adding the resistor as Keith suggest is probably best.
Pete
Pete
P38A Hevac.....🤬
- Thread starter Mark Piercy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 43,932
- Location
- Near Poitiers SW France
I can offer you some options, I can supply a working late model HEVAC pcb in exchange for your faulty late model HEVAC pcb, or I can modify your early HEVAC pcb, or I can look at repairing yours.
- Posts
- 12,129
- Location
- Sud ouest France !
Repairing mine would be my preferred option if I could please young maaaan
- Posts
- 12,129
- Location
- Sud ouest France !
I did the jump wire trick and bugger all kiddo....the system works with the original hevac and then the blend motor ghost fault is back...
- Posts
- 3,257
- Location
- Near Heathrow.
TBH def accept Keith’s repair offer. That way you have two working units.
Datatek
Well-Known Member
- Posts
- 43,932
- Location
- Near Poitiers SW France
Do you want me to send my spare working HEVAC pcb pending possible repair of yours?Repairing mine would be my preferred option if I could please young maaaan
- Posts
- 12,129
- Location
- Sud ouest France !
No need Keith but thank you , I'll get mine unmixed up with the doner unit and get it boxed up and sent to you.
Thanks again for all of your help
Datatek
Well-Known Member
- Posts
- 43,932
- Location
- Near Poitiers SW France
OK, feel free to change your mind. I will look at yours as soon as I get it.No need Keith but thank you , I'll get mine unmixed up with the doner unit and get it boxed up and sent to you.
Thanks again for all of your help
Bonne courage as the French say.
- Posts
- 12,129
- Location
- Sud ouest France !
Thanks mate
Datatek
Well-Known Member
- Posts
- 43,932
- Location
- Near Poitiers SW France
Please include a note to say which blend motor is the problem.Thanks mate
- Posts
- 12,129
- Location
- Sud ouest France !
I was going to put a summary of the issue in there for you my mate
Datatek
Well-Known Member
- Posts
- 43,932
- Location
- Near Poitiers SW France
GreatI was going to put a summary of the issue in there for you my mate
Similar threads
