Help needed for P38 (96) gems engine ht lead and cylinder set up

clyde · Dec 6, 2010

Has any one got a picture or information on how to set up the leads to the cylinders on a gems engine. I have picked up a 96 P38 for spare or repair. I'm on the final tidy up and puting it back together, but the only thing is the leads were off the engine so i'm not sure which way the new leads go on. If you live near st austell with a P38 maybe you could pop over with yours ao i can take a look. Cheers

robp38 · Dec 6, 2010

clyde said:
Has any one got a picture or information on how to set up the leads to the cylinders on a gems engine. I have picked up a 96 P38 for spare or repair. I'm on the final tidy up and puting it back together, but the only thing is the leads were off the engine so i'm not sure which way the new leads go on. If you live near st austell with a P38 maybe you could pop over with yours ao i can take a look. Cheers

download rave all the answers you need are in there

clyde · Dec 6, 2010

Cheers mate, i have rave, but need to know which is which, and the numbers are on which cylinder. sorry but its not that clear in rave.
TY

j the range · Dec 6, 2010

the firing order where on here the other day, do a search for it..

gemsdad · Dec 6, 2010

j the range said:
the firing order where on here the other day, do a search for it..

can you not do a search for him j,yer getting lazy in yer dotage mate.

nathan5346 · Dec 6, 2010

clyde said:
Cheers mate, i have rave, but need to know which is which, and the numbers are on which cylinder. sorry but its not that clear in rave.
TY

Rave was perfectly clear to me on the firing order... which bit dont you understand?

j the range · Dec 6, 2010

i could but i got my cant be arsed head on today, but i was nice about it hahaha..

clyde · Dec 6, 2010

OK, thanks 4 your help, no need 2 argue. I'll have another look at rave. TY

eightinavee · Dec 6, 2010

If the car is RHD the cyls on the passenger side are 1,3,5 and 7 from the front,2,4,6 and 8 on the drivers side.The positions for the leads in the coils is actually stamped into the bracket that the coils are bolted to.

clyde · Dec 6, 2010

thankyou

Help needed for P38 (96) gems engine ht lead and cylinder set up

clyde

Member

robp38

Well-Known Member

clyde

Member

j the range

New Member

gemsdad

NOT BOTHERED.

nathan5346

Well-Known Member

j the range

New Member

clyde

Member

eightinavee

Well-Known Member

clyde

Member

Similar threads