Help help help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

Arnirange

Member
Posts
85
Location
kent
Anyone living in kent that is good with ABS problems that can connect a PC to my P38 and find out what the hell is up with it. I do know it is some thig stupid but my meck has given up on it today.
 
I have a lot of posts on hear about this but i will explain. A while ago i was getting a funny noise around my wheel on full lock and then the ABS and traction lights would come on. I was told on hear that my wheel bearing was going so check it. Did this and they was right so changed wheel bearing. ABS and traction lights still coming on so i was told on hear to adjust sensor but every time i get the light of the ABS goes all mad and its like i have no brakes.So i was told on hear to replace sensor as it must have been damaged by wheel bearing. So change sensor and still the same ABS lights on breaks all ok, adjust sensor to put lights of no breaks. But car has faild MOT due to lights what do i do, my mec has given up as he dont know what to do now and said i should take it to main stealer. We do know its around that wheel or we would not be able to put the lights out like we can. Any clues would be great.
 
A PM is a private message btw.... top right hand corner :D click on that and on the left it will say send new message click on that, type in the name of the person you wanna send a PM to and type in the box what you wanna say :D
 
Arnirange said:
Now putting Range in with main stealer as i have had no luck on hear.
Click to expand...

don't sound so put out son, we aint experts and we certainly aint obliged to spend our free time trying to help others!!!

if you want to complain go ring landrover customer services!!!:doh:
 
Last edited:
Gav i aint complaining just saying i have run out of time so have to take it to main dealer. Have had loads of help on hear in past so think site is great and usefull. Have noticed one thing in all the time i have come on hear and read many posts. That is if anyone gets the hump and bites peoples heads of,nine times out of ten it is you. If going on hear and trying to help people that dont have a clue about what to do aint what you want to do mate maybe you should give it up and move on as there are many members that will help.
 
Took car to main dealer today. I stayed there for almost 8 hours why they just tried this and just tried that and run a lot of dignostic checks. They then decided that they think my problem is due to the ABS ring on the CV joint. I have taken the car away for my mec to change this then they give me the bill for the work. To say i was shocked is a under statement.
 
Arnirange said:
Gav i aint complaining just saying i have run out of time so have to take it to main dealer. Have had loads of help on hear in past so think site is great and usefull. Have noticed one thing in all the time i have come on hear and read many posts. That is if anyone gets the hump and bites peoples heads of,nine times out of ten it is you. If going on hear and trying to help people that dont have a clue about what to do aint what you want to do mate maybe you should give it up and move on as there are many members that will help.
Click to expand...

yeah i'll leave straight away!!!

:doh:
 
I am afraid that the main dealers these days are fitters and not technitions. 5 minutes up the road with a scope reading the sensor will tell you if its output is ok.
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A Looking for p38 parts in Kent area
Replies
13
Views
1K
Datatek
Datatek
I
Air.Susp.Inactive message on 2005 L322
Replies
4
Views
702
invisible999
I
H
D2 ABS Sensors
Replies
3
Views
395
sierrafery
sierrafery
P38 guy
Relay 6 and relay 7 relocating.
Replies
19
Views
1K
Datatek
Datatek
M
P38A Finally have time to be back on forums again
Replies
4
Views
346
brianp38dse
brianp38dse
Back
Top